BGYNS - 56 1001-20 RUSTRT LTX ENML WHIT
- MSDS: BGYNS
- Manufacturer: VALSPAR CORP
- Product Name: 56 1001-20 RUSTRT LTX ENML WHIT
- National Stock Number: 8010-00F008708
Product Identification
Product ID:56 1001-20 RUSTRT LTX ENML WHIT
MSDS Date:04/01/1988
FSC:8010
NIIN:00F008708
MSDS Number: BGYNS
Responsible Party
MINNEAPOLIS, MN 55415
Emergency Phone: (800) 228-5635
Info Phone: (612) 332-7371
Cage: 06758
Contractor
Telephone: 612-332-7371/800-228-5635
Cage: 13418
Ingredients
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 25%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
TEXANOL, 1,3-PENTANEDIOL 2,2,4-TRIMETHYL MONOISOBUTYRATE
CAS: 25265-77-4
RTECS: UF6000000
Fraction By Weight: 1%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: HARMFUL. MAY AFFECT THE
BRAIN, NERVOUS SYSTEM OR RESPIRATORY SYSTEM, CAUSING DIZZINESS,
HEADACHE, NAUSEA OR RESPIRATORY IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: HARMFUL. MAY AFFECT THE BRAIN,
NERVOUS SYSTEM OR RESPIRATORY SYSTEM, CAUSING DIZZINESS, HEADACHE,
NAUSEA OR RESPIRATORY IRRITATION.
Medical Cond Aggravated by Exposure:BY EXPOSURE ANY RESPIRATORY OR SKIN
CONDITION.
First Aid
First Aid:INHALATION: REMOVE PERSON FROM EXPOSURE AREA. IF BREATHING
HAS STOPPED, USE MOUTH-TO-MOUTH RESUSCITATION & GET MED ATT. EYE:
FLUSH W/WATER FOR 15 MINUTES. SKIN: WASH W/SOAP & WATER.
Fire Fighting
Flash Point Method:TCC
Lower Limits:2.60%
Upper Limits:12.50%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:FIRE FIGHTERS MUST WEAR SELF-CONTAINED
BREATHING APPARATUS OR AIR MASKS. CONTAINERS EXPOSED TO FIRE SHOULD
BE KEPT COOL W/WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:VENTILATE AREA. REMOVE SPILLS W/INERT
ABSORBENT.
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. DON'T STORE >120F. KEEP FROM FREEZING. EMPTY CONTAINERS MAY
CONTAIN PRODUCT RESIDUE.
Other Precautions:DON'T CUT, PUNCTURE OR WELD CONTAINERS. ALL WARNINGS
SHOULD BE OBSERVED UNTIL CONTAINER HAS BEEN CLEANED, RECONDITIONED
OR PROPERLY DISPOSED OF.
Exposure Controls
Respiratory Protection:WEAR APPROPRIATE, PROPERLY FITTED RESPIRATOR
(NIOSH/MSHA APPROVED) DURING & AFTER APPLICATION UNLESS AIR
MONITORING VAPOR/MIST LEVELS ARE BELOW APPLICABLE LIMITS. FOLLOW
RESPIRATOR MANUFACTURERS DIREC TIONS FOR RESPIRATOR USE.
Ventilation:PROVIDE ADEQUATE LOCAL EXHAUST VENTILATION TO KEEP
Eye Protection:USUAL
Other Protective Equipment:USUAL CLOTHING FOR PAINTING OPERATIONS.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212F
Vapor Pres:24.0
Vapor Density:7.40
Spec Gravity:1.24
Evaporation Rate & Reference:(BU AC = 1): .36
Solubility in Water:YES
Appearance and Odor:NORMAL FOR A COATINGS PRODUCT.
Percent Volatiles by Volume:65.91%
Stability
Stability Indicator/Materials to Avoid:YES
WATER-REACTIVE MATERIALS
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO2/CO
Disposal
Waste Disposal Methods:DISPOSE IN CHEMICAL DISPOSAL AREA OR IN A MANNER
THAT COMPLIES WITH LOCAL, STATE & FEDERAL REGULATIONS. DON'T
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.